Invacare IOH200 Owners Manual - Page 15
Connecting the Compressor to the, Concentrator
View all Invacare IOH200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
The power inlet acts as the mains disconnection device to remove all power to the unit when the line cord is disconnected. 3.6 Connecting the Compressor to the Concentrator 3.6.1 Connecting the Compressor to Invacare Concentrators Setup 1. Insert one end of the interconnect hose C into the outlet fitting B on the back of the concentrator A. 2. Insert the opposite end of the interconnect hose into the inlet fitting D on the side of the compressor. The metal tabs E on the concentrator outlet fitting and the compressor inlet fitting will pop out with an audible "click" when the end of the interconnect hose is properly installed. 3.6.2 Connecting the Compressor to Non-Invacare Concentrators 1. Refer to the oxygen concentrator user manual outlet gas specifications to verify compatibility with the HomeFill compressor input gas requirements listed in 8.2 Specifications, page 32. 2. Refer to the oxygen concentrator user manual for connecting instructions. 1100873-N 15