Invacare M91-TS Owners Manual - Page 99
Depth, Detail A - Bottom View Of Footboard
View all Invacare M91-TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Depth For this procedure, refer to FIGURE 7. 1. Remove the quick release pin that secures the footboard assembly to the wheelchair frame. ƽ WARNING Make sure the detent balls of the quick release pin are fully released and protruding past the outer edge of the tube before operating the wheelchair. Otherwise, injury and/or damage may result. Keep detent balls clean. 2. Adjust footboard to one of three mounting positions. 3. Install the quick release pin. Make sure the detent balls of the quick release pin are fully released and past the outer edge of the tube (Detail "A"). Wheelchair Frame Mounting Hole Three Depth Adjustment Holes Quick Release Pin Detent Ball 8 SETUP/MAINTENANCE Footboard Assembly DETAIL "A" - BOTTOM VIEW OF FOOTBOARD Quick Release Pin Part No 1143153 Outer Edge of Tube Detent Balls FIGURE 7 Adjusting the Footboard Assembly - Depth 99 Invacare® Pronto® M91™