Invacare TLRLSYS Owners Manual 2 - Page 24

SECTION 1-GENERAL GUIDELINES SECTION 1-GENERAL GUIDELINES ƽ WARNING SECTION 1 - GENERAL GUIDELINES contains important information for the safe operation and use of this product. Repair or Service Information Set-up of the Electronics Control Unit is to be performed only by a qualified technician. The final adjustments of the controller may affect other activities of the wheelchair. Damage to the equipment could occur if improperly set-up or adjusted. Except for programming, DO NOT service or adjust the wheelchair while occupied, unless otherwise noted. POWERED SEATING SYSTEMS ONLY - Pinch point may occur when lowering the elevating seat and/or returning the tilted seat to the full upright position. Make sure the hands and body of the occupant, attendants and bystanders are clear of all pinch points before lowering seat or returning the tilted seat to the full upright position. Before adjusting, repairing or servicing the wheelchair, ALWAYS turn the wheelchair power OFF, otherwise, injury or damage may occur. Transport ready packages are not retrofittable to existing models and are not field serviceable. Battery support brackets MUST be installed at all times. Otherwise, the wheelchair will not be WC/19 compliant. Refer to Installing/Removing Batteries Into/From Battery Boxes on page 89. Wheelchairs should be examined during maintenance for signs of corrosion (water exposure, incontinence, etc.). Electrical components damaged by corrosion should be replaced IMMEDIATELY. Wheelchairs that are used by incontinent users and/or are frequently exposed to water may require replacement of electrical components more frequently. Accessories Information Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products. 3G Storm Series® Wheelchairs 24 Part No 1134791