Invacare V18RLR Owners Manual - Page 30
Front Rigging
View all Invacare V18RLR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
6 FRONT RIGGING 6.2 Adjusting Footrest Height 1. Loosen, but DO NOT remove, the screw and locknut that secures the lower footrest assembly to the upper footrest support. 2. Reposition the lower footrest assembly to the desired height. 3. Securely tighten the screw and locknut that secures the lower footrest assembly to the upper footrest support. 4. If necessary, repeat STEP 1-3 for the opposite side of the wheelchair. Locknut Upper Footrest Support Screw Lower Footrest Assembly 6.3 Raising/Lowering Elevating Legrest Assembly 1. To raise the elevating legrest, the assistant or user should hold the support tube and raise the elevating legrests until the desired height is obtained. 2. To lower the elevating legrest, perform the following: A. Support the user leg with one hand. B. Push legrest release lever down with other hand. C. Gently lower user leg down and rest it against the legrest. FIGURE 2 Adjusting Footrest Height Legrest Release Lever Support Tube Invacare® Veranda™Wheelchair FIGURE 3 Raising/Lowering Elevating Legrest Assembly 30 Part No. 1148116