Invacare XPO100B Owners Manual - Page 32
Using the XPO, Portable Concentrator
View all Invacare XPO100B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
SECTION 6-OPERATING INSTRUCTIONS FLOW SETTING 1 2 3 4 5 AVERAGE PULSE VOLUME (AT 20 BREATHS PER MINUTE) 15 ml 23 ml 31 ml 37 ml 42 ml Indicator Lights On/Off Button Flow Selection FIGURE 6.9 Adjusting the Pulse Flow Setting Using the XPO2 Portable Concentrator 1. Turn the XPO2 On by pressing the On/Off button. 2. Breathe normally through your nose. Breathing through your mouth may result in less effective oxygen therapy. The XPO2 will put out a measured pulse of oxygen each time it detects inhalation. The blue flow setting indicator light will blink each time an inhalation is detected and the XPO2 outputs a pulse of oxygen. 3. Turn the XPO2 Off by pressing and holding the power On/Off button for approximately two seconds. NOTE: The time required for the XPO2 to reach maximum oxygen concentration after being turned On is approximately 5 minutes. Invacare XPO2™ 32 Part No 1148112