Invacare XTRA Owners Manual - Page 31
Adjusting Calfpads, Installing Adjustable Angle Flip-Up Footplate Hinge
View all Invacare XTRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Adjusting Calfpads NOTE: For this procedure, refer to FIGURE 4.5. 1. To adjust the calfpad, turn pad towards the outside of the wheelchair. 2. Slide the calfpad up or down until the desired position is obtained. 3. To secure the calfpad, turn the calfpad towards the inside of the wheelchair. SECTION 4-FRONT RIGGINGS Calfpad Adjust Calfpad Secure Calfpad FIGURE 4.5 Adjusting Calfpads Installing Adjustable Angle Flip-Up Footplate Hinge NOTE: For this procedure, refer to FIGURE 4.6. NOTE: This procedure is for individual adjustable angle footrests only. 1. Position the adjustable angle flip-up footplate hinge on the footrest support tube at the desired height. 2. Position the hardware on the footrest support (FIGURE 4.6). 3. Flip the footplate hinge to the UP position. NOTE: The footplate hinge will fall to the DOWN position. 4. Tighten the socket screw and locknut that secure the footplate hinge to the footrest support until the footplate hinge remains in the UP position. 5. Check the up and down motion of the footplate hinge to make sure the user of the wheelchair can operate the footplates easily. NOTE: If the footplate's motion is too tight, loosen the socket screw and locknut approximately 1/4-turn. Locknut Footplate Hinge Footrest Support Tube Socket Screw NOTE: If the footplate's motion is too loose, tighten socket screw and locknut approximately 1/4-turn. FIGURE 4.6 Installing Adjustable Angle FlipUp Footplate Hinge Part No 1026793 31 Xtra™
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60