JBL AS 5 Owners Manual English - Page 6
New Construction, After the Drywall is Installed
 |
View all JBL AS 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
AS Series Owner's Manual 9/11/98 12:51 PM Page 6 New Construction ≥1-1/2" ≥1-1/2" ≥1-1/2" Step One: Remove the grille from the speaker frame. Step Two: Determine the correct speaker location. Step Three: Attach the proper mounting brackets, marked and preset at 3/8", 1/2", 5/8", and 3/4", corresponding to the thickness of the dry wall, to the speaker frame. Step Four: Nail or screw the speaker-frame assembly to the wall studs and route the wires through the frame opening. After the Drywall is Installed Step Five: Cut the drywall. Step Six: Connect the speaker wires to the baffle assembly and install baffle assembly in frame. Do not overtighten the baffle screws. Step Seven: Replace the metal grille.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
 |
 |
New Construction
Step One:
Remove the grille from the
speaker frame.
Step Three:
Attach the proper mounting
brackets, marked and preset at
3/8"
, 1/2"
, 5/8"
, and 3/4", corre-
sponding to the thickness of
the dry wall, to the speaker
frame.
Step Two:
Determine the correct speaker
location.
≥
1-1/2"
≥
1-1/2"
≥
1-1/2"
Step Four:
Nail or screw the speaker-frame
assembly to the wall studs and
route the wires through the
frame opening.
Step Five:
Cut the drywall.
Step Six:
Connect the speaker wires to
the baffle assembly and install
baffle assembly in frame.
Do
not overtighten the baffle
screws.
Step Seven:
Replace the metal grille.
After the Drywall is Installed
AS Series Owner’s Manual
9/11/98 12:51 PM
Page 6