JBL AVR 101 Owners Manual Multilingual - Page 17

ENGLISH AVR Making Connections Connect Your Analog Audio Devices Use the AVR's analog audio connectors for source devices that don't have HDMI or digital audio connectors. AVR Analog Audio Connectors Stereo Audio Cable (not supplied) Connect the Radio Antennas • Connect the supplied FM antenna to the AVR's FM 75Ω antenna connector. For the best reception, extend the FM antenna as far as possible. • Bend and fold the base of the supplied AM antenna as shown and connect the antenna wires to the AVR's AM and Gnd connectors. (You can connect either wire to either connector.) Rotate the antenna as necessary to minimize background noise. AM Antenna (supplied) AVR Antenna Connectors Bend and fold base To Stereo Analog Audio Output Analog Source Device FM Antenna (supplied) Connect IR Equipment The AVR is equipped with a Remote IR Input connector that lets you remotely control the AVR in a variety of situations: • When you place the AVR inside a cabinet or facing away from the listener, connect an external IR receiver, such as the optional JBL HE 1000, to the AVR's IR In jack. External IR Receiver AVR IR In Jack USB and iOS Devices Use the AVR's front-panel USB port to connect an iPod, iPhone or iPad using an Apple cable (not supplied) or to directly connect a USB memory stick. You can play audio files from the device or memory stick and use the AVR's remote to control playback. AVR Front-Panel USB Port USB Memory Stick Apple Cable (not supplied) AVR and Source Devices Installed Inside of Cabinet Connect to Your Home Network Use a Cat. 5 or Cat. 5E cable (not supplied) to connect the AVR's Network connector to your home network to enjoy Internet radio and content from DLNA-compatible devices that are connected to the network. AVR Network Connector Network Modem Cat. 5/5E Cable (not supplied) To Home Network and Internet 17