JBL AWC82 Spec Sheet - Page 1

Professional Series Key Features: u H ighly weather-resistant IP56 rating. u C onsistent 120° x 120° broadband pattern control. u C omponents: • 2 00 mm (8 in) woofer with Kevlar-reinforced cone and 50 mm (2 in) voice coil. • 2 5 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm. u E xtraordinary clarity for speech, with extended frequency response for music. u A dvanced high-slope crossover network for constant coverage and smooth, natural midrange. u 2 50 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability. u H igh-power passive crossover network. u O verload protection. u 8 0 Hz - 20 kHz frequency response. u 2 00 Watt 70V/100V multi-tap (built-in transformer) or direct 8Ω low-impedance. Applications: The AWC82 is a compact, coaxial-driver, 2-way, highly weather-resistant full-range loudspeaker system which is ideal for speech and music-fill in a wide variety of applications, including sports facilities, racetracks, stadiums, fairgrounds, rodeos, skating rinks, themed entertainment venues, cruise ships, water parks, outdoor background music/ paging systems, swimming pools, and a wide variety of other outdoor or indoor venue types. The AWC82 is comprised of a high-power coaxial 200 mm (8 in) low frequency driver and 25 mm (1 in) high frequency compression driver. The co-axial design utilizes a unique tapered polepiece design and transitions to the cone of the low frequency driver as a large diameter pattern control horn for the high frequencies, both eliminating high-frequency beaming which is common among this category of speaker and extending pattern control to the lowest possible frequencies. The result is a coaxial speaker with wide, extremely consistent 120° coverage on a broadband basis. Component features include a Kevlar-reinforced low frequency cone for reliability, well-damped surround for smooth frequency response, high temperature voice coil and a reduced distortion design through saturated-gap magnet geometry. The high frequency compression driver features a unique patented design, high temperature polymer diaphragm, and fluid-cooling for high output levels with low distortion. The paintable enclosure is constructed of thick, ABS plus fiberglass and is heavily braced to maximize low-frequency performance. The corrosion-resistant zinc-rich extra-thick powder coated steel grille is backed with open cell foam and high thread-count mesh, providing excellent protection in the harshest environments. The system is rated IP-56, per IEC529 when installed at minimum 5° down-tilt. The system is equipped with a 200W 70V/100V multi-tap transformer. Connection is made via outdoor-rated terminals in a recessed terminal cup. A protective terminal compartment cover is included, along with gland nut, which forms a water-tight seal with round-jacketed cable having outside diameter between 4 mm (0.16 in) and 9 mm (0.36 in). A heavy-duty weather-capable zinc-rich, thick powder coated U-type mounting bracket is included. AWC82 All-Weather Compact 2-Way Coaxial Loudspeaker with 8" LF Specifications: System: Frequency Range (-10 dB)1: Frequency Response (±3 dB)1: Coverage Pattern2: Directivity Factor: Directivity Index (DI): Long-Term System Power Rating (IEC)3: Sensitivity (2.83V @ 1m): Maximum SPL4: Crossover Network: Nominal Impedance: Transformer Taps: Transducers: Low Frequency Driver: High Frequency Driver: Physical: HF Driver Protection: Enclosure: Attachment: Grille: Input Connection: Environmental: Dimensions: Colors: Net Weight: Shipping Weight: Included Accessories: 80 Hz - 20 kHz 100 Hz - 20 kHz 120º x 120º 8.1 (1 k - 16 kHz) 7.9 dB (1 k - 16 kHz) 250 W 2 hrs. 200 W 100 hrs 94 dB (Ave. 100 Hz - 20 kHz) Direct 8Ω: 118 dB (peaks of 124 dB) 200 W Tap: 117 dB 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF 8 ohms 70V: 200W, 100W, 50W, 25W 100V: 200W, 100W, 50W Kevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil. 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling. Minimum audibility SonicGuard™ HF overload protection ABS with Glass enclosure Two M10 (fine-thread) points for included U-bracket. Reference torque 15 ft.lb (20 N.m). M6 secondary safety attachment point on back panel. Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing. CE-compliant covered barrier strip terminals. Barrier terminals accept up to 8 mm outside 4 mm inside open-lug (#6 or #8) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with roundjacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36"). IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs). 300 x 300 x 305 mm (11.8 x 11.8 x 12.0 in), cabinet 331 mm (13.0 in) including gland nut 359 mm (14.2 in) including bracket extending to back Available in gray (similar to Pantone 420C) and black (-BK) 9.8 kg (21.5 lb), 11.6 kg (25.5 lb) with U-bracket 14.1 kg (31.0 lb) U-bracket, matches loudspeaker color (gray or black), zinc-rich extra thick powder coated, steel. ¹ Full-space (free-field) ² Average 1 kHz to 10 kHz 3 IEC standard, full bandwidth pink noise with 6 dB crest factor. 4 Calculated based on power rating and measured full-space sensitivity. JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are an expression of that philosophy.