JBL PRX815XLF Quick Start Guide English - Page 2

BACK PANEL PRX812 / PRX815 / PRX825 / PRX835 POWER IT ON SYSTEM EQ LED SYSTEM EQ* FRONT LED LIMIT LED MIC LED GAIN CONTROLS MIC SELECT SIGNAL LEDS XLR / ∂" INPUTS RCA SIGNAL LED RCA INPUTS WI-FI LINK LED WI-FI CONNECT 50/50 MIX LED 50/50 MIX SELECT MIX OUT REMOTE EQ LED POWER LED POWER INPUT/SWITCH * a. NORMAL/BOOST ( PRX825 & PRX835 only) BOOST position when LED is ON b. MAIN/MONITOR (PRX812 and 815 only) MONITOR position when LED is ON PRX815XLF / PRX818XLF 1. Connect the supplied power cord to the IEC inlet on the rear of the speaker. 2. Connect the power cord to an available power outlet. 3. Press the Power switch. The LED power light will turn blue when powered. PLUG IN THE INPUTS 1. Turn the Gain control knobs all the way to the left. It's a good idea to turn the inputs down all the way before plugging in. 2. Connect XLR or TRS cable from audio source to the inputs. SET OUTPUT LEVEL 1. Set the gain level for each input using the Gain controls. POLARITY LED POLARITY SELECT FRONT LED LIMIT LED GAIN CONTROL SIGNAL LEDS XLR / ∂" INPUTS WI-FI LINK LED WI-FI CONNECT HI-PASS LED HI-PASS SELECT THRU CONNECTORS REMOTE EQ LED POWER LED POWER INPUT/SWITCH WI-FI CONTROL 1. This device allows for additional control and configuration features via a WI-FI application. Please visit www.jblpro.com for the application and instructions. Please visit jblpro.com for complete documentation. JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 USA © 2017 HARMAN International Industries, Incorporated PART NUMBER: 5069055-B