JET Tools FS-1652J User Manual - Page 3

24. Do not cut rods with the foot shear. 25. Sheet metal stock has sharp edges; use caution when handling to prevent cuts. 26. Keep hands and fingers clear of the blade and hold-down area. Do not place hands or fingers between material and table when operating. 27. Do not exceed rated capacity of the foot shear. 28. Do not exceed front gauge capacity - material must not be so long that it interferes in any way with safe operation of the foot pedal. Familiarize yourself with the following safety notices used in this manual: This means that if precautions are not heeded, it may result in minor injury and/or possible machine damage. injury. This means that if precautions are not heeded, it may result in serious, or possibly even fatal, SAVE THESE INSTRUCTIONS 2.0 About this manual This manual is provided by JET, covering the safe operation and maintenance procedures for a JET Model FS1652T Foot Shear. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. Your machine has been designed and constructed to provide consistent, long-term operation if used in accordance with the instructions as set forth in this document. If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our web site: www.jettools.com. Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it. Read and understand the entire contents of this manual before attempting assembly or operation! Failure to comply may cause serious injury! 3