JET Tools JAT-402 User Manual - Page 4

20. Do not use power tools in damp or wet location, or expose them to rain. Keep work area well lighted. 21. Do not leave a connected tool unattended. When not in use, disconnect tool from air source. 22. Shut off air supply and discharge any residual pressure from tool before removing hose, making adjustments, changing accessories, or storing tool. 23. Make sure tool is switched off, and your finger off the trigger, before connecting to air supply. 24. Remove adjusting keys and wrenches before turning on tool. 25. Keep visitors a safe distance from the work area. Keep children away. 26. Give your work undivided attention. Looking around, carrying on a conversation and "horse-play" are careless acts that can result in serious injury. 27. Do not force a tool or attachment to do a job for which it was not designed. The right tool will do the job better and more safely. 28. Repetitive motions and/or exposure to constant vibration can be harmful to hands and arms. Take frequent breaks and relax hands during extended operation. Change posture to avoid discomfort or fatigue. 29. Compressed air can be harmful if directed toward sensitive areas of the body, and may propel small particles caught in the air stream. Exercise proper caution. 30. Use only recommended accessories; improper accessories may be hazardous. 31. Maintain tools with care. Keep air tool clean and oiled for best and safest performance. 32. Do not use combustible gases, carbon dioxide, oxygen or any bottled gas as an air source for the tool. These can present risk of explosion and serious injury. 33. Do not lubricate the tool with combustible liquids, such as kerosene, diesel or jet fuel. 34. Do not dispose of this tool with normal household waste. Never dispose of the air tool into fire. Specific warnings for Die Grinders 35. This die grinder is designed for deburring, polishing, grinding and surface preparation. If you are not familiar with the proper and safe operation of a pneumatic die grinder, do not use until proper training and knowledge have been obtained. 36. Speed rating of tool attachment must equal or exceed rated free speed of die grinder. 37. Make sure attachment is securely inserted into collet and collet nut is tight. 38. Make sure workpiece is secure and will not shift while operating die grinder. Do not hold workpieces with your hand. 39. Use only attachments designed for the collet size of die grinder. Do not modify an attachment or use bushings, wheel flanges, etc., to mount an attachment of incorrect size. Familiarize yourself with the following safety notices used in this manual: fatal, injury. This means that if precautions are not heeded, it may result in serious, or even This means that if precautions are not heeded, it may result in minor injury and/or possible tool damage. 4 JAT-401,402 Die Grinders