JVC AV27F485 Instructions - Page 24

Initial Setup Auto Tuner Setup The auto tuner setup function is described on page 17 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below. π† √® √® Press the MENU button To AUTO TUNER SETUP To operate To choose CABLE or AIR † √® To move to START To start Auto Tuner Setup Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the message PROGRAMMING OVER! appears onscreen. Channel Summary Channel summary allows you to customize the line-up of channels received by your TV. You can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 181 channels. Press the MENU button π† √® To CHANNEL SUMMARY To operate The Channel summary screen will now be displayed with the channels set to scan marked with an "√". You can delete channels from the scan by removing the "√". If any channels were missed during auto tuner setup and you wish to add them, you may by placing an "√" next to the channel number. π† √® π† √® √® † † √® To the SCAN column To include or delete from scan To the ID column To add channel label To insert letter To next letter To move to FINISH when label is complete To memorize the label Press the EXIT button when finished � � � � � � � � � � � �� � �� You can block access to a channel by activating the channel lock. Press the MENU button π† √® π† To CHANNEL SUMMARY To operate To the Lock Column ( ) Press the ZERO button to lock or unlock that channel Press the EXIT button when finished 24