JVC BP11 Instruction Manual - Page 16

BD320-JN_BUSAJJK_OM_ENG 8/31/09 12:16 PM Page 16 Resolution Setting The player provides several output resolutions for HDMI OUT jack. You can change the resolution using [Setup] menu or pressing the RESOLUTION button in stop mode. Note: Since several factors affect the resolution of video output, see "Available resolution according to the resolution setting" on this page. Auto - If the HDMI OUT jack is connected for TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV. 1080p - Outputs 1080 lines of progressive video. 1080i - Outputs 1080 lines of interlaced video. 720p - Outputs 720 lines of progressive video. 480p - Outputs 480 lines progressive video. 480i - Outputs 480 lines of interlaced video. How to check the current resolution using RESOLUTION button Press RESOLUTION button in stop mode. The current resolution appears in the display window (1080p, etc.) You can change the resolution also by pressing RESOLUTION button repeatedly. RESOLUTION button 5. Use v / V to select the desired resolution then press ENTER to confirm your selection. Available resolution according to connection and media format HDMI OUT connection • For the 480i resolution setting, real output resolu- tion of HDMI OUT will change to 480p. • If you select a resolution manually and then con- nect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto]. • If you select a resolution that your TV does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution. • If the [1080p Display Mode] option is set to [24 Hz], the 1080p video output frame rate may be automatically set to either 24Hz or 60Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc. VIDEO OUT connection The resolution of the VIDEO OUT jack is always outputted at 480i resolution. Note: Depending on your display, some of the resolution settings may result in the picture disappearing or an abnormal picture appearing. In this case, press HOME key then RESOLUTION repeatedly until the picture re-appear. How to change the resolution using Setup menu 1. Press HOME and the Home Menu appears. 2. Select [Setup] and press ENTER. The Setup menu appears. 3. Use v / V to select [DISPLAY] option then press B to move to the second level. 4. Use v / V to select the [Resolution] option then press B to move to the third level. Available resolution according to the resolution setting Resolution Setting 480i 480p 720p 1080i 1080p / 24Hz 1080p / 60Hz HDMI OUT 480p 480p 720p 1080i 1080p / 24Hz 1080p / 60Hz 16