JVC DLA-F110E Instruction Manual - Page 17
How to insert batteries into the remote control, Remote Control
View all JVC DLA-F110E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Getting Started ENGLISH Controls and features (continued) ■ Remote Control To turn off the power To set the screen size (Reference page: 32) Anamorphic To control lens (Reference page: 30) To hide the image temporarily(Reference page: 34) STAND BY ON COMPONENT HDMI 1 HDMI 2 COMP. ASPECT ANAMO PC LENS. CONTROL C.M.D AUTO ALIGNMENT HIDE LIGHT To turn on the power To select input mode (Reference page: 30) Clear Motion Drive Auto Alignment (Reference page: 49) To illuminate buttons on the remote control for 7 second To select or confirm To display/close the menu (Reference page: 41) MENU BACK PICTURE MODE NATURAL DYNAMIC 3D USER1 USER2 USER3 To return to the previous menu (Reference page: 41) To switch picture mode To adjust color temperature To set gamma USER4 USER5 USER6 GAMMA COLOR TEMP LENS. AP PIC. ADJ. Lens Aperture Sequentially switched picture adjust items, such as contrast and brightness.The switching items are not the same for different models, or different picture modes. How to insert batteries into the remote control ① ② ③ ● If the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out. When this happens, replace the batteries. Insert the batteries according to the marks. ● Be sure to insert the end first. ● If an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the batteries again and operate the remote control. 17