JVC DLA-M5000SCU Instruction Manual - Page 11

Remote Control Unit (Cont.) QUICK ALIGN. OPERATE AV HIDE PRESET PAGE BACK MENU/ AV RGB/COMPUTER U SHIFT D T ZOOM W LENS + FOCUS - ENTER LENS LOCK UNLOCK ENTER LENS LOCK UNLOCK Controls and Features QUICK ALIGN. OPERATE AV HIDE PRESET PAGE BACK MENU/ AV RGB/COMPUTER U SHIFT D T ZOOM W LENS + FOCUS - + VOLUME - ESPAÑOL ITALIANO FRANÇAIS DEUTSH ENGLISH p AV button Use this button to select the devices such as a video connected to the projector's AV IN (EXT. input) terminal. Each time you press the button, the selection changes as follows: Y/C* VIDEO* YPBPR * Y/C and VIDEO can be used only when a video board separately sold has been installed. q LENS LOCK j UNLOCK switch With this switch set at the LOCK position, adjustment operations (focus, zoom or shift) with the remote control are disabled, preventing adjustment contents from being inadvertently changed while the remote control is being used. When adjustment is needed, set the switch to the UNLOCK position. w PRESET button While making adjustment on the main or setting menu, use this button to reset the setting of the selected item to the factory-set value. This button works only for numerical settings and does not work for switching ON to OFF. e QUICK ALIGN. (Quick Alignment) button Use this button to automatically adjust TRACKING, PHASE, H. POS. and V. POS. of the projected video. During the automatic adjustment, "QUICK-ALIGNMENT" (Quick-Alignment) appears on the screen, and disappears after it is finished. Memo Quick alignment function: Does not work for video input (EXT. IN input terminal) signals. Works only for computer-related (RGB -1 and -2 input terminals) signals. CAUTION • Automatic adjustment with the quick alignment function should be done on a bright still-picture screen. This function may not work correctly on a dark screen or motion-picture screen. If adjustment with this function is not satisfactory, adjust TRACKING, PHASE, H. POS. and V. POS. manually (see pages 29, 35 and 36). r AV HIDE button Use this button to turn off the video image temporarily. Pressing it again makes the video image to resume. t Not used with this projector 11