JVC DRMV7S Instructions - Page 52
Symptom, Cause, Correction
UPC - 046838026515
View all JVC DRMV7S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Symptom The Recorder does not start playback. Cause No disc is inserted. No tape is inserted. An unplayable disc is inserted. The disc is placed upside down. The disc is not placed within the guide. The disc is dirty. The Rating level is set. Video tape cannot be inserted. The Remote Control does not work properly. Is the cassette compartment empty? There is an obstacle in the path of the Remote Control and this unit. The batteries in the Remote Control are exhausted. The Remote Control is not pointed at the remote sensor of the Recorder. The Remote Control is too far from the Recorder. This Remote Control use the same buttons for VCR and DVD functions (ex.PLAY). The remote control's code does not match. Camcorder image is not shown. Camcorder image via A/V input or DV IN to Recorder is not shown on TV screen. Timer recording is not possible. Camcorder is off. The recorder's source is incorrect. Clock in record is not set to correct time. Timer has been programmed incorrectly. Has the power supply been stopped temporarily? (TIMER Record) indicator light does not appear after programming timer. The TV program has copyonce signal. Correction Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.) Insert a playable disc. (Check the disc type and Regional code.) Place the disc with the playback side down. Place the disc on the disc tray correctly inside the guide. Clean the disc. Cancel the Rating function or change the rating level. Eject the tape in. Remove the obstacle. Replace the batteries with new ones. Point the Remote Control at the remote sensor of the Recorder. Operate the Remote Control within 23ft (7m). When using a VCR, first press the VCR button. When using a DVD, first press the DVD button. If the power has been unplugged or the power supply has been stopped, the unit code is changed to C code automatically. Reset the remote control code of the unit. Turn camcorder on and operate properly. Use AV INPUT to select input channel (AV1, AV2 or DV IN). Set clock to correct time. Reprogram Timer. If the power has been unplugged or the power supply has been stopped, the Timer Recording setting is cancelled. Reset the clock setting and Timer Recording setting. (If you set the clock setting to Auto, the clock is set automatically.) Reprogram Timer and turn off the Recorder enable timer. Use DVD-RW discs formatted in VR mode. 52