JVC DW303 Instruction Manual - Page 4

Connections Checking Your Amplifier Before connecting this unit to your amplifier (or receiver), check what types of connecting terminals your amplifier has. Follow the instructions below to find a proper connection method for your equipment. • Illustrations of jacks and terminals in this manual may be different from the ones actually used for your amplifier. The illustrations are of the most used type. First check whether your amplifier has a subwoofer output jack. It is usually named and printed as the "SUBWOOFER OUT" or "SUBWOOFER." Before connecting this unit to the amplifier (or receiver), observe the following carefully. • Before connecting this unit to an amplifier, turn off the amplifier first. • Make all connections before plugging in this unit. • DO NOT use the INPUT 1 (LOW-LEVEL) and INPUT 2 (HIGH-LEVEL) terminals on the rear of this unit at the same time; otherwise, noise will be heard and may damage the unit. • DO NOT connect this unit to the REC OUT jacks of your amplifier. SUBWOOFER OUT If you find it on your amplifier, follow Connecting Method Å. If you cannot find any Next check whether your amplifier has line output jacks. They are usually named and printed as "LINE OUT" or "LINE OUTPUT." LINE OUT L R Connecting to the Amplifier When connecting to your amplifier (or receiver), refer also the manual supplied for your equipment. Connecting Method Å Connect an amplifier having a subwoofer output jack to the LEFT/MONO jack of the INPUT 1 (LOW-LEVEL) terminal. Preparation: Use the supplied monaural audio cord. Main (Front) Speakers (not supplied) SUBWOOFER OUT If you find them on your amplifier, follow Connecting Method ı. If you cannot find any Follow Connecting Method Ç. This connection can be used for any amplifier, by connecting the front speaker terminals of the amplifier (usually named and printed as "FRONT SPEAKERS" or "MAIN SPEAKERS"). FRONT SPEAKERS Your Amplifier VOLUME MIN FREQUENCY 50Hz MAX 200Hz AUTO POWER ON/STANDBY ON CANCEL PHASE NORMAL REVERSE RIGHT CUT OFF FILTER VARIABLE FIXED LEFT/MONO INPUT 1 (LOW-LEVEL) RIGHT LEFT INPUT 2 (HIGH-LEVEL) RIGHT TO MAIN SPEAKERS LEFT POWER OFF ON Monaural audio cord (supplied) RIGHT LEFT/MONO INPUT 1 (LOW-LEVEL) SX-DW303 To an AC outlet RIGHT LEFT When using Connecting Method Å, no signal comes out of the TO MAIN SPEAKERS terminal. - 4 -