JVC DX-J21 Instructions - Page 6

Introduction Playable Disc/File Types DIGITAL VIDEO SUPER VIDEO Note on Region Code INFO DVD Video players and DVD Video discs have their own Region Code numbers. This system can play back DVD Video discs whose Region Code numbers include "1." COMPACT DIGITAL AUDIO The "√" in the list below shows available disc/file types. Recording format CD-DA (normal CD) VCD/SVCD CD-R/ -RW*1 √ √ Media type DVD-R/ USB mass -RW, +R/ storage class +RW*2 device - - - - Discs DVD Video DVD-VR - √ - - √*3 - Audio file: MP3/WMA/WAV √ √ √ AV files Video file: MPEG-1/MPEG-2/ √ √ √ ASF Still picture file: JPEG √ √ √ *1 Recorded with "ISO 9660" format. *2 Recorded with "UDF-Bridge" format. *3 Not applicable for +R/+RW. In addition to the above discs/files, this System can play back audio data recorded on CD-Extra and DVD/CD Text. • The following discs cannot be played back: DVD-RAM, CD-I (CD-I Ready), Photo CD and CD-G (CD-Graphics). Playing back these discs will generate noise and damage the speakers. • This System cannot play back DVD-VR disc with CPRM (Content Protection for Recordable Media). • DVD Logo is a trademark of DVD Format/Logo Licensing Corporation. • In this manual, "file" and "track" are interchangeably used for AV file operations. • It is possible to play back finalized +R/+RW (DVD Video format only) discs. Caution for DualDisc playback: The Non-DVD side of a "DualDisc" does not comply with the "Compact Disc Digital Audio" standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended. About color system This System accommodates both NTSC and PAL system and can play back discs/files recorded in either system. To change the color system, see page 6. Audio formats The System can play back the following digital audio formats. • LPCM (Linear PCM), DIGITAL (Dolby Digital), DTS (Digital Theater Systems), MPEG Audio • Multi-channel sound will be downmixed into 2-channels. To enjoy multi-channel sound, connect a compatible decoder or an amplifier with a compatible decoder to the OPTICAL DIGITAL OUTPUT terminal on the rear. How to Read This Manual • Button and control operations are explained in the table below. • Some related tips and notes are explained later in the sections "Learning More about This System" and "Troubleshooting," but not in the same section explaining the operations ( INFO indicates that the content has some information). Indicates that you press the button briefly. Indicates that you press the button briefly and repeatedly until an option you want is selected. Indicates that you press one of the buttons. 2sec. Indicates that you press and hold the button for a specified period. The number inside the arrow indicates the period of a press (in the example, 2 seconds). Indicates that you turn the control toward the specified direction(s). Remote ONLY Main Unit ONLY Indicates that this operation is only possible using the remote control. Indicates that this operation is only possible using the main unit. 1