JVC EX D1 Instruction Manual - Page 40
Troubleshooting
UPC - 046838017995
View all JVC EX D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Troubleshooting When you encounter a problem that seems to be a fault, check the following points before contacting your JVC service center. Power source 7 Power does not come on. • The power cord is not connected to the main unit or an AC outlet. → Connect the power cord correctly (page 11). Operation 7 You cannot operate any button. • Some specific operations may be inhibited for some discs. 7 The remote control does not work. • The dry-cell batteries have run out. → Replace the batteries (page 6). 7 A disc cannot be played back. • In the case of DVD VIDEO discs → Check the Region Code number of the discs (page 3). • "NO PLAY" is displayed on the display window. It is not a disc that can be played on this system. → Check the disc type (page 3). • Parental Lock is set (page 30). About images 7 No picture appears. • The video cord is not connected correctly. → Page 11 • Both of the component video jack and Svideo jack are connected. → Connect either (page 11). 7 The picture is distorted. • A VCR is connected between the main unit and the TV set. → Connect the main unit directly to the TV set (page 11). • Although this system is connected to a nonProgressive TV set, DVD's scan mode is set to "PROGRESSIVE". → Set the scan mode to "INTERLACE" (page 26). 7 The screen size is abnormal. • The screen size is set improperly. → Set "MONITOR TYPE" according to the TV set you are using (page 29). 38 Reference 7 The TV screen darkens. • "SCREEN SAVER" is set. → If set, press any button (page 29). 7 The screen cannot be switched. • The Progressive mode is applied only to component video output. About sound 7 There is no sound. • Speakers are not connected correctly. → Page 9 • The sound is muted. → Page 16 • "NO AUDIO" is displayed on the display window. The disc may have been produced through illegal copying. → Confirm at the store where you bought the disc. 7 The sound is weak compared with TV or Video. • "DVD LEVEL" is set to "NORMAL". → Set to other than "NORMAL" (page 26). 7 The sound is distorted. • The volume is turned up too high. → Turn down the volume (page 16). 7 No sound comes out of the subwoofer. • "SUBWOOFER" is turned off. → Press S.WFR OUT to turn on (page 10). 7 The sound through the USB connection stops. • Noise and static electricity may stop the sound through the USB connection. In this case, do the following operations: → Disconnect and connect the USB cable again → Restart the music software on your PC → Turn off and on the system About radio 7 The sound is noisy while receiving/Receiving is disabled. • The antenna is not connected correctly. → Connect the antenna correctly (page 8).