JVC FS-B70 Instruction Manual - Page 24
Recording
View all JVC FS-B70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Recording IMPORTANT: • It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable program and in any literary, dramatic, musical, or artistic embodied therein. • The recording level is automatically set correctly, so it is not affected by the other sound settings. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level. • If recordings you have made have excessive noise or static, the unit may be too close to a TV. Increase the distance between the TV and the unit. • You can only use type I tape for recording. DO NOT use type II and type IV tapes since the unit is not compatible with such tapes. The use of C-120 or longer tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch rollers and the capstans. Recording on a Tape 1 Insert a recordable cassette into the cassette compartment with the exposed part of the tape facing left. • See also page 20. 2 Check the recording direction for the tape. • If the tape direction is not correct, press 2 3 TAPE twice then 7 to change the tape direction. • If you want to record on both sides of a tape, see "To record on both sides-Reverse Mode" below. 3 Start playing the source-FM, AM or auxiliary equipment connected to AUX/DVD jacks. • When recording from discs, see "Recording Discs- Disc Synchronized Recording" on page 22. 4 Press REC (recording). REC The REC (recording) indicator lights up on the display and recording starts. At the start and end of cassette tapes There is leader tape which cannot be recorded onto. Thus, when recording from discs, FM/AM broadcasts, or external equipment, wind the leader tape first to ensure that the recording will be made without losing any music. "NO REC" will appear on the display when you press REC in the following cases: • If no cassette is inserted. • If a protected tape is inserted. • If any tray is open when the source is the CD player. To protect your recordings Cassettes have two small tabs on the back to protect against unexpected erasure or re-recording. To protect your recording, remove these tabs. To re-record on a protected tape, cover the holes with adhesive tape. Adhesive tape To stop while recording, press 7. To remove the cassette, press 0 on the unit. TAPE To record on both sides-Reverse Mode On the remote control ONLY: Press REV.MODE (reverse mode) REV. MODE repeatedly so that the Reverse Mode indicator lights up like- or . • The Reverse Mode indicator lights up on the display like- while recording. • Make sure that the tape direction is set to the forward (3) direction before starting to record. Otherwise, recording will stop when only one side (reverse) of the tape is recorded. To cancel the Reverse Mode, press the button so that the Reverse Mode indicator lights up like- . 21