JVC FS-H100 Instruction Manual - Page 19
Recording
View all JVC FS-H100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Recording Continued IMPORTANT: • It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable program and in any literary, dramatic, musical, or artistic embodied therein. • The recording level is automatically set correctly, so it is not affected by the other sound settings. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level. • If recordings you have made have excessive noise or static, the unit may be too close to a TV. Increase the distance between the TV and the unit. • You can only use type I tape for recording. • DO NOT turn off the unit while playing back or recording a tape. The cassette deck or tapes may be damaged. • DO NOT use type II and type IV tapes since the unit is not compatible with such tapes. • The use of C-120 or longer tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch rollers and the capstans. At the start and end of cassette tapes There is leader tape which cannot be recorded onto. Thus, when recording from discs, FM/AM broadcasts, or external equipment, wind the leader tape first to ensure that the recording will be made without losing any music. Recording on a Tape On the unit ONLY: 1 Put a recordable cassette in with the exposed part of the tape down. • See also page 15. 2 Close the cassette holder gently. 3 Start playing the source-FM, AM, or auxiliary equipment connected to AUX jack. • When the source is FM or AM, tune in to the station you want to record. • When recording from discs, see "Recording Discs- Disc Synchronized Recording" on page 18. 4 Press ‡ (recording). ‡ and # lock down, and the recording starts. • REC indicator is shown on the display during recording. You cannot press ‡ (recording) in the following cases: • If no cassette is inserted. • If a protected tape is inserted. To stop recording for a moment, press *. To resume recording, press * again. To protect your recordings Cassettes have two small tabs on the back to protect against unexpected erasure or re-recording. To protect your recording, remove these tabs. To re-record on a protected tape, cover the holes with adhesive tape. To stop recording, press &/). To remove the cassette, press &/) while recording is stopped. Adhesive tape 17