JVC FS-H300 Instruction Manual - Page 17
Playing Back Tapes
View all JVC FS-H300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Playing Back Tapes Playing Back a Tape You can play back type I tapes only. 1 Press PUSH OPEN. The cassette holder opens. PUSH OPEN If no cassette is inserted when you press TAPE ¤ ‹ "NO TAPE" appears on the display. UP To stop playing, press 7. PRESET GROUP DOWN PRESET GROUP DOWN UP 4 7 ¢ 2 Put a cassette in with the exposed part of the tape down. To fast-wind to the left or to the right, UP PRESET GROUP press ¢ or 4 (or UP ¢ or DOWN 4 on the unit). DOWN PRESET The tape direction indicator ( 3 or 2 ) starts GROUP flashing rapidly on the display. DOWN UP 4 7 ¢ To remove the cassette, press PUSH OPEN on the unit while playback is stopped. PUSH OPEN 3 Close the cassette holder gently. To play both sides-Reverse Mode You can set the deck to play just one side of a tape, both sides once, or both sides continuously. On the remote control ONLY: Press REV.MODE (reverse mode). • Each time you press the button, the Reverse Mode changes as follows: REV.MODE • When a tape is inside of the cassette holder, the tape direction indicator ( 3 ) lights up on the display. 4 Press TAPE ¤ ‹. TAPE Playback starts (if the unit has been on standby, the unit automatically turns on). The tape direction indicator ( 3 or 2 ) starts flashing slowly on the display. • Each time you press the button, the tape direction changes: 3: plays the front side. 2: plays the reverse side. When the tape plays to the end, the deck automatically stops if the Reverse Mode is set to or . (See "To play both sides-Reverse Mode.") : The deck automatically stops after playing both sides of the tape. Stops when playback in the 2 direction is finished. : The deck continues to play both sides of the tape 10 times, then stops playback automatically. : The deck automatically stops after playing one side of the tape. • DO NOT turn off the unit while playing back or recording a tape. The cassette deck or tapes may be damaged. • The use of C-120 or longer tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch rollers and the capstans. • This unit is not compatible with type II and type IV tapes. 14