JVC FS-H35 Instruction Manual - Page 15

Listening to FM and AM Broadcasts Continued Tuning in to a Station 1 Press TUNER (or BAND TUNER on the unit) to select the band. The unit automatically turns on and tunes in to the previously received station-either FM or AM. • Each time you press the button, the band alternates between FM and AM. TUNER BAND TUNER 2 Press and hold ¢ or 4 for more than 1 second. The unit starts searching for stations and stops when a station of sufficient signal strength is tuned in. • If a program is broadcast in stereo, the STEREO indicator lights up. To stop searching, press ¢ or 4. When you press ¢ or 4 briefly and repeatedly The frequency changes step by step. To change the FM reception mode On the remote control ONLY: When an FM stereo broadcast is hard to receive or noisy, press FM MODE so that the MONO indicator lights up on the display. Reception will improve. FM MODE To restore the stereo effect, press FM MODE again so that the MONO indicator goes off. In stereo mode, you can hear stereo sound when a stereo program is broadcast. Presetting Stations You can preset 30 FM and 15 AM stations-using either automatic presetting or manual presetting. In some cases, test frequencies have been already memorized for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. To preset stations automatically-Automatic presetting You need to preset stations separately for the FM and AM bands. On the remote control ONLY: 1 Press TUNER to select the TUNER band. The unit automatically turns on and tunes in to the previously received station-either FM or AM. • Each time you press the button, the band alternates between FM and AM. 2 Press and hold AUTO PRESET for more than 2 AUTO PRESET seconds. Local stations with strong signals are searched for and stored in memory automatically. When automatic presetting is over, the station stored in preset number 1 is tuned in. • Storing new stations erase the previously stored one. 3 Repeat steps 1 and 2 to store stations for the other band. When you cannot automatically store stations you want Stations with weak signals cannot be detected with automatic presetting. To store such stations, use manual presetting. 12