JVC G210 Instruction Manual - Page 18

ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 Select the item you want to adjust. Each time you press the button, the adjustable items change as follows: BAS (bass) VOL (volume) TRE (treble) LOUD (loudness) FAD (fader) BAL (balance) *1 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode (C-EQ) including "USER". *2 If you are using a two-speaker system, set the fader level to "00". *3 Normally the control dial works as the volume control. So you do not have to select "VOL" to adjust the volume level. *4 Depending on the amplifier gain control setting. (See page 19 for details). 2 Adjust the setting. To increase the level or turn on the loudness Indication To do: Range BAS*1 Adjust the bass. -06 (min.) | +06 (max.) TRE*1 FAD*2 Adjust the treble. Adjust the front and rear speaker balance. -06 (min.) | +06 (max.) R06 (Rear only) | F06 (Front only) BAL Adjust the left L06 (Left only) and right speaker | balance. R06 (Right only) LOUD*1 Boost low and high frequencies to produce a wellbalanced sound at low volume LOUD ON | LOUD OFF level. VOL*3 Adjust the volume. 00 (min.) | 30 or 50 (max.)*4 To decrease the level or turn off the loudness Indication pattern changes as you adjust the bass or treble. Ex. 1: When you adjust "TRE" (treble) Ex. 2: When you turn on the loudness 3 Repeat steps 1 and 2 to adjust the other items. To reset each sound mode to the factory settings, repeat the same procedure and reassign the preset values listed in the table on page 17. 18