JVC GR-D290 Instruction Manual - Page 25
D.S.C. RECORDING, Basic Shooting (D.S.C. Snapshot), Interval Shooting - digital camera
UPC - 046838017438
View all JVC GR-D290 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Basic Shooting (D.S.C. Snapshot) You can use your camcorder as a Digital Still Camera for taking snapshots. Still images are stored in the memory card. NOTE: Before continuing, perform the procedures listed below: ● Power (੬ pg. 13) ● Loading a Memory Card (੬ pg. 17) SNAPSHOT Power Switch VIDEO/ MEMORY Lock Button 1 Remove the lens cap. 2 Open the LCD monitor fully. (੬ pg. 18) 3 Set the VIDEO/MEMORY Switch to "MEMORY". 4 Set the Power Switch to "A" or "M" while pressing down the Lock Button located on the switch. ● To change the Image Size and/or Picture Quality, ੬ pg. 31, 34. 5 Press SNAPSHOT. The "O" indication appears while the snapshot is being taken. ● Still images are recorded in the snapshot mode with no frame. ● To delete unwanted still images, refer to "Deleting Files" (੬ pg. 29). ● When you do not want to hear the shutter sound, set "BEEP" to "OFF". (੬ pg. 31, 33) NOTE: If shooting is not performed for approx. 5 minutes when the Power Switch is set to "A" or "M" and power is supplied from the battery pack, the camcorder shuts off automatically to save power. To perform shooting again, push back and pull out the viewfinder again or close and re-open the LCD monitor. D.S.C. RECORDING EN 25 Approximate Number of Storable Images ● The number increases or decreases depending on the Picture Quality/Image Size, etc. Image Size/Picture Quality SD Memory Card 8 MB* 16 MB* 32 MB* 64 MB* 640 x 480/FINE 47 95 205 425 640 x 480/STANDARD 160 295 625 1285 1024 x 768/FINE 21 47 95 200 1024 x 768/STANDARD 65 145 310 640 Image Size/Picture Quality MultiMediaCard 8 MB** 16 MB* 32 MB* 640 x 480/FINE 55 105 215 640 x 480/STANDARD 190 320 645 1024 x 768/FINE 25 50 100 1024 x 768/STANDARD 75 160 320 * Optional ** Provided (GR-D290 only) Interval Shooting During Interval Shooting mode, the camcorder continues to take snapshots automatically with an interval of your desired setting. 1 Set "INT.SHOT" to "ON". (੬ pg. 31, 35) ● "INTERVAL" and " " appear. 2 Set "INT.TIME" to the desired shooting interval. (੬ pg. 31, 35) 3 Set the Power Switch to "A" or "M" while pressing down the Lock Button located on the switch. 4 Press SNAPSHOT. ● First shot is taken after 2 seconds. ● The "O" indicator appears while the snapshot is being taken. ● The clock icon " " turns while waiting for the next shot is being taken. ● The next shot is being taken automatically when the shooting interval set in step 2 has passed. 5 Press SNAPSHOT to stop Interval Shooting. DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK CONTINUED ON NEXT PAGE