JVC GRD30 Instruction Manual - Page 24

TIME CODE [OFF]: Time code is not displayed. ON: Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording. CLOCK ADJ. Allows you to set the current date and time (੬ pg. 10). For Playback Menu The following procedure applies to all except Synchro Comp (੬ pg. 32). 1 Set the Power Switch y to "PLAY" while pressing down the Lock Button t located on the switch. 2 Press the MENU/VOLUME wheel $ in. The Menu Screen appears. 3 Rotate the MENU/VOLUME wheel $ to select the desired function menu, and press it. 4 Rotate the MENU/VOLUME wheel $ to select the desired function, and press it to display the Sub Menu. 5 Rotate the MENU/VOLUME wheel $ to select the desired parameter and press it. Selection is complete. 6 Rotate the MENU/VOLUME wheel $ to select " RETURN" and press it twice to close the Menu Screen. VIDEO V I DEO SOUND MODE- STEREO 12b i t MODE- SOUND 1 SYNCHRO - O . O REC MODE - S / AV I NPUT- OFF RETURN SOUND MODE pg. 25, "Playback Sound". 12bit MODE pg. 25, "Playback Sound". SYNCHRO pg. 32, "For More Accurate Editing". REC MODE Allows you to set the tape recording mode ([SP] or LP) depending on your preference (੬ pg. 10). It is recommended you use "REC MODE" in the " VIDEO" Menu when using this camcorder as a recorder during dubbing (GR-D50 only, ੬ pg. 26, 27). • "REC MODE" can be set when the Power Switch y is set to "PLAY" or " " (੬ pg. 10, 21). S/AV INPUT (GR-D50 only) ON: Enables audio/video signal input from the AV and S-VIDEO connectors (੬ pg. 26). [OFF]: Enables audio/video signal output to a TV, VCR, etc. via the AV and S-VIDEO connectors (੬ pg. 15, 26). • When "S/AV INPUT" is set to "ON", camcorder playback cannot be viewed on the AV output. SYSTEM S Y S T EM BEEP - MELODY TALLY - ON REMOTE - ON DEMO MODE - ON PR I OR I TY - LCD CAM RESET RETURN Each setting is linked with " SYSTEM", which appears when the Power Switch y is set to " " (੬ pg. 23). The parameters are the same as in the description on pg. 23. [ ] = Factory-preset EN 24 USING MENUS FOR DETAILED ADJUSTMENT