JVC GY-DV300U Installing the KA-DV300/350 Network Pack and accessory cards - Page 1
JVC GY-DV300U - 1/3" 3-ccd Dv Camcorder Manual
View all JVC GY-DV300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
JVC PROFESSIONAL PRODUCTS COMPANY Application Note 1 Subject: Installing the KA-DV300/350 Network Pack and accessory cards Objective Before you can stream video or record to a CompactFlash (CF) memory card, you must attach the KA-DV300 or KA-DV350 Network Pack to the GY-DV300 camcorder. Once installed, accessory cards, such as a LAN or CF memory card must be installed. What you need • GY-DV300 camcorder • KA-DV300 network pack or KA-DV350 Cisco Aironet 350 enabled network pack • One of the following accessory cards, depending on application: Wired LAN: Socket Communications (www.socketcom.com) EA2900-117. A CF to PCMCIA (PC Card) adapter is required. Wireless LAN: Linksys (www.linksys.com) WCF11. A type II CF to PCMCIA (PC Card) adapter is required. Socket Communications (www.socketcom.com) WL6000-320. A CF to PCMCIA adapter is required (can only be used with KA-DV300 firmware revision 2.0 or later). Symbol Technologies (www.symbol.com) Wireless Networker CompactFlash Card. A CF to PCMCIA (PC Card) adapter is required (can only be used with KA-DV300 firmware revision 2.0 or later). Cisco (www.cisco.com) Aironet 350 model AIR-PCM35x (can only be used with a KA-V350 network pack). CF Memory: SanDisk (www.sandisk.com) SDCFB-16 ~ SDCFB-256. A CF to PCMCIA adapter is required. Attaching the Network Pack to the Camera 1. Insure that the GY-DV300 power is off. 2. Slide the connector cover located on the bottom of the GY-DV300 in the direction as shown by the arrow located next to the connector cover. Page 1 of 2