JVC GY-HM750U Owner's manual for the GY-HM750 ProHD Camcorder (138 pages) - Page 25

Preparations Attaching Accessories Knob Microphone Attaching the Zoom Lens (Supplied with GY-HM750U/GY-HM750E only) Hole Pin 13 REC 2 Clamp 4 1 Loosen the mount ring. 2 Attach the zoom lens such that the pin matches the hole of the mounting area. 3 Tighten the mount ring. 4 Connect the cable connector. 5 Attach the lens cable to the clamp. Memo : ● Tighten the mount ring completely. If it is not fully tightened, the lens may drop or the back focus may be out of alignment. ● When attaching or removing the zoom lens, set the [POWER] switch of the camera recorder to AOFFB. Attaching the Microphone (Supplied) You can attach the supplied microphone to the microphone holder. The supplied microphone has a phantom power supply. 1 Turn the knob on the microphone holder anticlockwise to loosen and open the microphone holder. 2 Place the microphone in the microphone holder. 3 Turn the knob on the microphone holder clockwise to secure the microphone. 4 Connect the microphone cable to the [INPUT1] or [INPUT2] terminal. 5 Pin the microphone cable to the clamp. 6 Make sure to perform the correct settings for the phantom microphone (A Page 46). Microphone Holder Clamp [INPUT1/INPUT2] Terminal Attaching the Viewfinder (Supplied) 1 Slide the viewfinder in the direction of the arrow to attach it. 2 Turn the slide lock ring to secure the position of the viewfinder. Slide Lock Ring 2 1 Viewfinder 3 Attach the viewfinder cable to the viewfinder terminal. 4 Pin the viewfinder cable to the clamp. Clamp 3 21