JVC GY-HM850U Instruction Manual - Page 28

. . . .. Preparations Settings and Adjustments Before Use Attaching the Lens (Supplied) 13 Attaching the Microphone (Supplied) You can attach the supplied microphone to the microphone holder. The supplied microphone uses a phantom power supply. 1, 3 2 2 54 1 Loosen the mount ring. 2 Attach the zoom lens such that the pin matches the hole of the mounting area. 3 Tighten the mount ring. 4 Connect the cable connector. 5 Attach the lens cable to the clamp. Memo : 0 To attach or detach the zoom lens, set the [POWER ON/OFF] switch on this unit to "OFF". 0 Tighten the mount ring completely. If it is not fully tightened, the lens may drop or the back focus may be out of alignment. 0 Lens is supplied for GY-HM890U, GY-HM890E, GY-HM850U, and GY-HM850E. Adjusting the Grip Belt A C Adjust the grip belt. 5 4 1 Turn the knob on the microphone holder anticlockwise to loosen and open the microphone holder. 2 Place the microphone in the microphone holder. 3 Turn the knob on the microphone holder clockwise to secure the microphone. 4 Connect the microphone cable to the [INPUT1] or [INPUT2] terminal. 5 Pin the microphone cable to the clamp. 6 Perform the settings for the phantom mic correctly. (A P69 [Audio Recording] ) Attaching the Viewfinder (Supplied) 1 Slide the viewfinder in the direction of the arrow to attach it. 2 Turn the slide lock ring to secure the position of the viewfinder. 2 Caution : 0 If the grip is loose, the camera recorder may fall 1 off resulting in injuries or malfunction. 28 Settings and Adjustments Before Use