JVC GZ HD10 Instructions - Page 16
Necessary Settings before Use
UPC - 046838035630
View all JVC GZ HD10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Necessary Settings before Use Charging the Battery Pack 1 Close the LCD monitor to turn off the camera. 2 Attach the battery pack. Ⅵ To detach the battery pack Slide and hold BATT. (step 2), then remove the battery pack. BATT. 3 Connect the AC adapter. NOTES • You can also use the camera with just the AC adapter. • Please do not pull or bend the AC adapter plug and cable. This may damage the AC adapter. DC Connector AC Adapter To AC Outlet (110V to 240V) • The power/charge lamp blinks to indicate charging has started. • When the lamp goes out, charging is finished. Ⅵ Required charging/recording time (approx.) * When the LED light is off and the monitor backlight is set to [STANDARD] mode. Battery pack Charging time Recording time BN-VF808U (Provided) 1 hr. 30 min. 1 hr. 00 min.* BN-VF815U BN-VF823U 2 hr. 40 min. 3 hr. 50 min. 2 hr. 00 min.* 3 hr. 05 min.* NOTE The actual recording time may shorten depending on the recording environment, such as when recording scenes with fast moving. 16 EN Checking the Remaining Battery Power Preparation: • Close the LCD monitor to turn off the camera. • Attach the battery pack. mode: press INDEX twice. mode: press INDEX. BATTERY CONDITION INDEX MAX TIME min Battery information is displayed for approx. 3 seconds if the button is pressed and released quickly, and for approx. 15 seconds if the button is pressed and held for several seconds. Ⅵ To return to the normal screen Press INDEX. NOTE The recordable time display should only be used as a guide. It is displayed in 10 minute units.