JVC GZ HD10 other - Page 31

Macintosh 2 Connecting the Camera to the Macintosh Preparation: Close the LCD monitor to turn off the camera. USB Connector To AC Outlet AC Adapter USB Cable USB Connector DC Connector • Never disconnect the USB cable while the access lamp on the camera lights or blinks. • Do not turn off the camera when the USB cable is connected, to prevent malfunctions of the computer. • Connect the camera directly to the computer, not through a hub. • Do not use an extension USB cable. • Do not delete, move, or rename the files and folders in the camera from the computer. ◆ When you have finished operation Always follow the procedures below when disconnecting the camera, or turning off the camera/ computer power. Failing to do so may cause damage to the camera and computer. 1) Drag & drop the recording medium icon on the desktop into the [Trash] icon. If the confirmation message appears, click [OK]. 2) Confirm that the access lamp on the camera does not light or blink. If the access lamp lights or blinks, wait until it is turned off before proceeding. 3) Disconnect the USB cable. 4) Turn off the camera and computer. 31