JVC GZ HD30 other - Page 19

Using a microSD Card, Set [REC MEDIA FOR VIDEO] and [REC

Page 19 highlights

Using a microSD Card The camcorder is programmed to record on the built-in hard disk when it is shipped from the factory. You can change the recording medium to microSD card. • Operations are confirmed on the following microSD cards. - Panasonic - TOSHIBA - SanDisk - ATP Video recording: Class 4 or higher compatible microSDHC card (4 GB to 8 GB) For UXP mode, use Class 6 or higher. Still image recording: microSD card (256 MB to 2 GB) or microSDHC card (4 GB to 8 GB) • If other media are used, they may fail to record data correctly, or they may lose data that had already been recorded. • MultiMediaCards are not supported. • Video data may not be recorded onto the microSD cards on which video data have already been recorded using the devices from other manufacturers. Insert a microSD card Preparation: Close the LCD monitor to turn off the camcorder. 1 Open the microSD card cover. 2 Firmly insert the card with its clipped edge first.  To remove a microSD card Push the microSD card once. After the card comes out a little, pull it out. NOTE • Insert and remove the microSD card only while the power is turned off. Otherwise, data on the card may be corrupted. • Do not touch the terminal on the reverse side of the label. Change the recording medium Set [REC MEDIA FOR VIDEO] and [REC MEDIA FOR IMAGE] to [SD]. (Z p. 68) Format a microSD card when using it for the first time Select [FORMAT SD CARD] to format the card. (Z p. 68) 3 Close the microSD card cover. EN 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

EN
Using a microSD Card
The camcorder is programmed to record on
the built-in hard disk when it is shipped from
the factory. You can change the recording
medium to microSD card.
Operations are confirmed on the following
microSD cards.
- Panasonic
- TOSHIBA
- SanDisk
- ATP
Video recording:
Class 4 or higher compatible microSDHC
card (4 GB to 8 GB)
For UXP mode, use Class 6 or higher.
Still image recording:
microSD card (256 MB to 2 GB) or
microSDHC card (4 GB to 8 GB)
If other media are used, they may fail to
record data correctly, or they may lose data
that had already been recorded.
MultiMediaCards are not supported.
Video data may not be recorded onto the
microSD cards on which video data have
already been recorded using the devices
from other manufacturers.
Insert a microSD card
Preparation:
Close the LCD monitor to turn
off the
camcorder.
1
Open the microSD card cover.
2
Firmly insert the card with its clipped
edge first.
3
Close the microSD card cover.
To remove a microSD card
Push the microSD card once.
After the card comes out a little, pull it out.
NOTE
Insert and remove the microSD card only
while the power is turned off. Otherwise, data
on the card may be corrupted.
Do not touch the terminal on the reverse side
of the label.
Change the recording medium
Set [REC MEDIA FOR VIDEO] and [REC
MEDIA FOR IMAGE] to [SD]. (
Z
p. 68)
Format a microSD card when using it for
the first time
Select [FORMAT SD CARD] to format the
card. (
Z
p. 68)