JVC GZ HD300B other - Page 5
Date/Time Setting, Select [CLOCK SETTING]
UPC - 046838037870
View all JVC GZ HD300B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Date/Time Setting Q Open the LCD monitor to turn on the camcorder T Select the city closest to the area where you use the camcorder Power button LCD monitor R Select [YES] within 10 seconds Slide your finger up and down on the sensor. Then touch OK. U Select [ON] if daylight saving time is observed • When the message disappears, press the power button for at least 2 seconds to turn off the power, and then press it again for at least 2 seconds. • Touch the sensors with your finger. The sensors do not function if you touch them with your finger nail or with gloves on. V Set the date and time Touch sensor: Sets the date and time }: Moves the cursor to the right OK: Clock starts S Select [CLOCK SETTING] EN
´
EN
Date/Time Setting
Q
Open the LCD monitor to
turn on the camcorder
Power button
LCD monitor
R
Select [YES] within
10 seconds
•
When the message disappears, press the
power button for at least 2 seconds to turn
off the power, and then press it again for at
least 2 seconds.
•
Touch the sensors with your finger. The
sensors do not function if you touch them
with your finger nail or with gloves on.
S
Select [CLOCK SETTING]
T
Select the city closest to
the area where you use
the camcorder
U
Select [ON] if daylight
saving time is observed
V
Set the date and time
Slide your finger up and down on the
sensor. Then touch
OK
.
Touch sensor
: Sets the date and time
}
: Moves the cursor to the right
OK
: Clock starts