JVC GZ-HD40 other - Page 29
Aperture Priority, Auto], F1.8 To F4.0, Cloud, Halogen, Effect, Sepia, Monotone, Classic Film°
UPC - 046838035654
View all JVC GZ-HD40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Menus Settings: [ ] = Factory-preset < APERTURE PRIORITY You can add a blurring effect to the background by setting the aperture value (F-number). @ [AUTO]: The aperture value is adjusted automatically. F1.8 to F4.0: The lower the F-number (larger aperture value), the more blurred the background will become. The higher the F-number (smaller aperture value), the clearer the focus will be for both near and far objects. Move the set lever to ¡ / ¢ to set the value. NOTE If the image is too bright, set to a larger F-number. If the image is too dark, set to a smaller F-number. = WB Adjusts the white balance to achieve the optimum colors for the amount of light in your surroundings during recording. @ [AUTO]: White balance is adjusted automatically. B MWB: Adjusts the white balance manually depending on the light source. 1) Hold a sheet of plain white paper in front of the subject so that the white paper fills the screen. 2) Press and hold the set lever until the B indicator starts blinking then stops blinking. D FINE: When shooting outdoors on a sunny day. E CLOUD: When shooting outdoors on a cloudy day. F HALOGEN: When a video light or similar type of lighting is used. w EFFECT Enables you to record videos or still images with special effects. 1 [OFF]: No effect is used. J SEPIA: The image has a brownish tint like old photos. K MONOTONE: The image becomes black and white like old movies. L CLASSIC FILM*: This effect skips frames to give images of an old movie atmosphere. M STROBE*: The image looks like a series of consecutive snapshots. t TELE MACRO Enables you to shoot a subject as large as possible at a distance of approx. 50 cm (1.64 ft). > ZEBRA* The sections of the photographic subject that are reflected as white due to light are displayed in a striped pattern. Use this as a guide for adjusting the brightness. 1 [OFF]: Deactivates the function. 0 ON: Activates the function. 1 [OFF]: Deactivate this function. 70%: Sections that are close to being reflected as white (bright) are displayed in a striped pattern. 100%: Sections that are completely reflected as white (too bright) are displayed in a striped pattern. ^ SHARPNESS* Adjusts the enhancement level of the outline of the recorded image. * ! mode only Adjust the sharpness moving the set lever to £ / ¤ , then press down. NOTE Enhancing the sharpness causes the recorded image to appear grainy. EN 29