JVC GZ-HM960BUS Basic User Guide - Page 34
Troubleshooting, Trouble
View all JVC GZ-HM960BUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Troubleshooting If you encounter problems with this unit, check the following before requesting service. 1 Refer to "Trouble" below. 2 Refer to the "Troubleshooting" section in the "Detailed User Guide". If you have difficulties operating the unit, refer to the detailed descriptions in the "Detailed User Guide". 0 http://manual.jvc.co.jp/index.html/ 3 Refer to the FAQ of new products on JVC's website. 0 http://www.jvc.com/ 4 This unit is a microcomputer-controlled device. Electrostatic discharge, external noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such a case, reset the unit. A Turn off the power. (Close the LCD monitor.) B Remove the AC adapter and battery pack from this unit, reattach them, open the LCD monitor and this unit powers on automatically. 5 If the above do not solve the problem, consult your nearest JVC dealer or JVC service center. Trouble Power Trouble POWER/CHARGE lamp starts blinking when the monitor is closed. Action 0 The battery pack is being charged. Page 10 Recording cannot be performed. 0 Check the A / B button. 15 0 Set to the recording mode by tapping 18 the q button. Recording Recording stops automatically. 0 Turn off this unit, wait for a while, and - turn it on again. (This unit stops automatically to protect the circuit when the temperature rises.) 0 Recording stops automatically after 12 - hours of continuous recording. Sound or video is interrupted. 0 Sometimes playback is interrupted at - the connecting section between two scenes. This is not a malfunction. Playback 34 For more information, refer to the Detailed User Guide http://manual.jvc.co.jp/index.html/