JVC GZ MC200 Instructions - Page 14

14 EN GETTING STARTED Power This camera's 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment. Charging the Battery Pack Power Switch Lock Button OPEN Battery/CF Card Cover Open the cover. Battery Pack 1 Set the power switch to OFF while pressing down the lock button located on the switch. 2 Slide and hold OPEN in the direction of the arrow A, then open the battery/CF card cover. 3 Insert the battery pack firmly into the battery pack mount until it locks into space as shown in the illustration. 4 Close the battery/CF card cover firmly until it locks. 5 Connect the AC adapter to the camera. 6 Plug the AC adapter into an AC outlet. The power/ charge lamp on the camera blinks to indicate charging has started. 7 When the power/charge lamp goes out, charging is finished. Unplug the AC adapter from the AC outlet. Disconnect the AC adapter from the camera. To detach the battery pack Open the battery/CF card cover, and remove the battery pack while sliding BATTERY in the direction of the arrow B. To DC connector BATTERY Protrusion Power/Charge Lamp AC Adapter To AC outlet Battery pack Charging time BN-VM200U (provided) Approx. 1 hr. 35 min.