JVC GZ-MG20US Instructions - Page 9
Attaching the Core Filter, LCD Monitor
UPC - 046838021770
View all JVC GZ-MG20US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
GETTING STARTED Attaching the Core Filter Attach the core filters to the cables. The core filter reduces interference. 1 Release the stoppers on both ends of the core filter. GETTING STARTED EN 9 LCD Monitor Pull on the end of the LCD monitor and open the LCD monitor fully. It can rotate 270°. Stopper 2 Run the cable through the core filter, leaving approx. 3 cm of cable between the cable plug and the core filter. Wind the cable once around the outside of the core filter as shown in the illustration. Core Filter 3 cm (1-3/16") Wind once. ● Wind the cable so that it is not slack. 3 Close the core filter until it clicks shut. NOTES: ● Take care not to damage the cable. ● When connecting a cable, attach the end with the core filter to the camera.