JVC GZ MG335 Guide Book - Page 46

Copying Files (Continued) Using a VCR/DVD Recorder to Dub Files from the Camera Preparation: • Set [SWITCH TO ANALOG I/O] to [OUTPUT]. (Factory-preset = [OUTPUT])* (੬ pg. 63) • Turn off all units. * This does not apply to the GZ-MG360/330 model. AV Jack DC Jack To AC Outlet AC Adapter AV Cable 1 Set the VCR/DVD recorder to its AUX input mode. 2 Start playback on the camera. • To play back videos (੬ pg. 27) • To play back playlists ("To dub playlists using a VCR/DVD recorder" ੬ pg. 37) 3 At the point you want to start dubbing, start recording on the VCR/ DVD recorder. Refer to the VCR/DVD recorder's instruction manual. - To stop dubbing Stop recording on the VCR/DVD recorder, then press the START/STOP button again. NOTE To record only the date information among the display indications, set [DISPLAY ON TV] to [ON], and touch the OK button until date/time indication appears. (੬ pg. 65) VCR/DVD Recorder AV Input Jack You can also connect the cables using the jacks on the Everio dock connectors. The S-Video or DV cable (optional) enables even higher dubbing quality. (੬ pg. 10) When other devices such as a DVD burner are connected to the Everio dock, turn the power of these devices off.* * GZ-MG360/330 model does not include the Everio dock. 46