JVC GZ-MG365B Guide Book - Page 16
Necessary Settings before Use
UPC - 046838032561
View all JVC GZ-MG365B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Necessary Settings before Use Be sure to configure the following three settings before use. Charging the Battery Pack 1 Close the LCD monitor to turn off the camera. 2 Attach the battery pack. Slide the battery pack down until it locks in place. Bottom of the Camera BATT. • When the lamp goes out, charging is finished. Unplug the AC adapter from the AC outlet and disconnect the AC adapter from the camera. - To detach the battery pack Slide and hold BATT. (੬ step 2), then remove the battery pack. - To check the remaining battery power See page 18. NOTES • You can also use the camera with just the AC adapter. • Please do not pull or bend the AC adapter plug and cable. This may damage the AC adapter. 3 Connect the AC adapter. DC Jack AC Adapter To AC Outlet (110V to 240V) • You can also connect the AC adapter using the Everio dock connector. (੬ pg. 10) • The charge lamp blinks to indicate charging has started. 16