JVC GZ MG630 other - Page 66
Trouble, Action, Recording, Too bluish, too reddish - flash
UPC - 046838037078
View all JVC GZ MG630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Troubleshooting (Continued) Recording Trouble Action Recording cannot be performed. • Slide the mode switch to select the desired mode (! or #). Recording stops by itself. • If the camcorder temperature increases, REC flashes in the LCD monitor and recording stops automatically to protect the HDD. Turn off the camcorder, wait for a while, and start recording again. • Move away from a place where the camcorder is affected by excessive sound or vibration (such as a concert hall). • A malfunction may occur in the HDD of the camcorder. In this case, record to a microSD card. • Insert a commercially available microSD card, and set each of the [REC MEDIA FOR VIDEO] and [REC MEDIA FOR IMAGE] to [SD]. • Recording stops automatically after 12 hours of continuous recording. The recorded subject is too dark. • Use backlight compensation. • Set [GAIN UP] to [AGC] or [AUTO]. • Use [NIGHT] from scene select. • Set the brightness to the [+] side. The recorded subject is too bright. Digital zoom does not work. The focus is not adjusted automatically. • Set the backlight compensation to [OFF] if it is being used. • Set the brightness to the [-] side. • Change [ZOOM] to [80X/DIGITAL] or [800X/DIGITAL]. • Digital zoom is not available in the still image recording mode. • Wipe the lens with lens cleaning cloth. • If you are recording in a dark place or a subject that has no contrast between dark and light, adjust the focus manually. The color looks strange. (Too bluish, too reddish, etc) • Set [WB] in [MANUAL SETTING] appropriately to the light source. • Select [MWB] in [WB] while holding a sheet of plain white paper in front of the camcorder so that the white paper fills the screen. Keep touching OK until the B indicator appears. White balance setting cannot be activated. • This cannot be used if [SEPIA] or [MONOTONE] are selected as effects. • Do not use [TWILIGHT] from scene select. The continuous shooting speed is slow. • The continuous shooting speed will drop after continuous shots. • Continuous shooting speed may drop depending on the recording media or under certain recording conditions. Band of bright light appears on the LCD monitor. • This occurs when there is a bright light source near the camcorder. This is not a malfunction. Change the direction of the camcorder to prevent the light source comes into view. 66 EN