JVC GZ-MG630S Instructions - Page 37

FURTHER INFORMATION Changing the Menu Settings 1 Touch MENU. 2 Select the desired menu. Ⅵ To return to the previous screen Select !. Ⅵ To quit the screen Select [QUIT]. 3 Select the desired setting. Troubleshooting Before requesting service, consult the following chart. If the solutions indicated in the chart do not solve the problem, consult your nearest JVC dealer or JVC service center for instructions. Refer also to the FAQ of new products on JVC's website. The following phenomena are not malfunctions. • The camcorder heats up when it is used for a long time. • The battery heats up during charging. • When playing back a video, the image stops momentarily or the sound is interrupted at junctions between scenes. • LCD monitor momentarily become red or black when sunlight is recorded. • Black spots, or red, green, or blue spots appear on the LCD monitor. (The LCD monitor contains 99.99% effective pixels, but 0.01% of fewer pixels may be ineffective.) Power Display Trouble No power is supplied. The remaining battery display is not correct. The LCD monitor is difficult to see. Action • Connect the AC adapter correctly. • Recharge the battery pack. • Fully charge the battery pack, run it down, and then recharge it again. • If the camcorder is used for long periods of time in high or low temperatures, or if the battery pack is repeatedly charged, the amount of remaining battery may not be displayed correctly. • The LCD monitor may be difficult to see if used in bright areas such as under direct sunlight. EN 37