JVC GZMG630RUS Guide Book - Page 62
Record Button, Quick Restart, Drop Detection, Remote, Update, Factory Preset
UPC - 046838037436
View all JVC GZMG630RUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Changing the Menu Settings (Continued) Menus Settings: [ ] = Factory-preset RECORD BUTTON Enables the recording button [REC] on the LCD monitor. OFF: Deactivates the function. [ON]: Activates the function. ` QUICK RESTART Enables the camcorder to start up quickly when you turn off the camcorder and then on again within 5 minutes by closing and opening the LCD monitor. OFF: Deactivates the function. [ON]: If the LCD monitor is opened again within 5 minutes, the camcorder starts quickly. The power consumption used for the 5 minute period after the LCD monitor is closed is approximately 1/3 that used during recording. This enables you to save more power than leaving the power on. ^ DROP DETECTION Prevents damage to the HDD by turning off the power automatically when it is detected that the camcorder dropped. OFF: Deactivates the function. [ON]: Activates the function. To turn on the camcorder when the drop detection worked, close the LCD monitor and open it again. NOTE • The built-in hard disk of the camcorder may not be protected even if the setting is [ON]. • When recording/playback stops even if the camcorder is not dropped, set the setting to [OFF] or set [REC MEDIA FOR VIDEO] to [SD]. (Z p. 64) ] REMOTE Turns on/off reception of the operation signal from the remote control. OFF: Does not receive the signal from the remote control. [ON]: Enables operation with the remote control. UPDATE Updates and improves the system software. YES: Performs this function. [NO]: Cancels this function. NOTE Information about obtaining system update will be made available on the JVC's web site. Z FACTORY PRESET Returns all the camcorder settings to their default values. YES: Performs this function. [NO]: Returns to the menu screen without executing reset. 62 EN