JVC GZMG680BUS Easy Start Up Guide - Page 1

Charging the Battery Pack How to Use the Touch Sensor Recording Files Installing the Software to the PC 2 Close the LCD monitor to turn off the camcorder. 3 Attach the battery pack, then connect the AC adapter. Access lamp Power/Charge lamp Open the cover Battery Pack AC Adapter To AC Outlet (110V to 240V) The battery pack is not charged at the time of purchase. • The battery (BN-VF808U) will take 110 minutes to completely charge. • The power/charge lamp blinks to indicate charging has started. When the lamp goes out, charging is finished. - Checking the remaining battery power Video () mode Press the INFO button twice or the INFO button and then select . Still image () mode Press the INFO button. - How to change the MENU settings 2 Touch the MENU button. 2 3 Slide your finger up and down on the Touch Sensor. 4 Touch the OK button. 3 1 • The sensors do not function if you touch them with your finger nail or with gloves on. - How to play back your videos 2 Press the PLAY/REC 3 Highlight thumbnail button to display using Touch Sensor thumbnails on the screen. and touch OK button. - Using on-screen buttons A To select an on-screen button appearing on the left side, touch the portion of the sensor next to the on-screen button. B To select an on-screen button appearing at the bottom of the screen, touch the buttons underneath them. Preparation: 2 Open the LCD monitor to turn on the camcorder. 3 Slide the mode switch to select (video or still image) mode. 4 Press the PLAY/REC button to set on recording mode. The video camera icon () represents recording video. The camera icon () represents recording stills. Video () mode Press the START/STOP button to start or stop recording. • You can take pictures during video recording only by pressing SNAPSHOT button. Still image () mode Press the SNAPSHOT button to take pictures. To view the video or image you just recorded; Press the QUICK REVIEW ( ) button. • During the preview you can delete the video or image by pressing the DELETE (  ) button. Preparation: • Load the provided CD-ROM into the PC. • In Windows Vista, the auto play dialog box appears. 2 Click [Easy Installation]. Follow the on-screen instructions. 3 Click [Next]. 4 Click [Finish]. • Everio MediaBrowser icon is created on the desktop.