JVC HD-61Z585 Instructions - Page 13
Quick Setup, Connections - replacement lamp for
UPC - 046838013010
View all JVC HD-61Z585 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Quick Setup Connections Basic Operation POWER T Turn the television on and off by pressing the POWER button at the top right corner of the remote. The POWER LED will light blue. If this is the first time you are turning on the TV, the interactive plug-in menu appears. • Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if you need to operate a cable box. • Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to DVD to control a DVD player. Please see pages 25 to 28 for instructions on programming your remote control to operate a cable box, VCR or DVD player. TV CATV VCR DVD A Note: • If the lamp replacement message appears when you turn the television ON, see page 68. Step 2 - Connecting Your Devices Please follow the flow chart below to determine which connection setup is right for you. Then, refer to the appropriate diagrams to connect your television to other devices that you may have. After you are finished connecting your devices, plug the power cord into the nearest power outlet and turn on the TV. A VCR is not necessary for operation of the television. If you follow these diagrams and the television does not work properly, contact your local cable operator. • To connect a DVD player, see Diagram #3. A DVD player is optional. • If you have a satellite television system, please refer to the satellite TV manual. Do you use a Cable TV Box? Yes No Do you have a VCR? Do you have a VCR? Yes No Diagram #2 Diagram #1 Yes No Diagram #3 Diagram #1 13