JVC HR-XVC11B Instructions - Page 10
Preparation - dvd player
UPC - 046838034312
View all JVC HR-XVC11B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Preparation Depending on your TV and other equipment there are various ways you can connect the player. Please refer to the manuals of your TV, VCR, stereo system or other devices as necessary for additional connection information. Notes: • The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units away from each other or turn off the unit after removing the disc. • Do not connect the unit's AUDIO OUT jack to the phono in jack (record deck) of your audio system. Do not connect the unit via another VCR. The DVD image could be distorted by the copy protection system. Basic TV Connections Make one of the following connections, depending on the capabilities of your TV. Rear of TV VIDEO INPUT AUDIO INPUT L R V A1 Audio/Video connection 1. Connect the DVD/VCR VIDEO OUT jack on the unit to the video in jack on the TV using the video cable supplied (V). 2. Connect the Left and Right DVD/VCR AUDIO OUT jacks on the unit to the audio left/right in jacks on the TV using the supplied audio cables (A1). Note: If you use this connection, set the TV's source selector to VIDEO. Optional TV Connections These connections support only DVD playback. The VCR still output through the DVD/VCR OUT (A1, V) jacks. Component Video / Progressive Scan connection If your television is a high-definition or "digital ready" television, you may take advantage of the unit's progressive scan output for the highest possible video resolution. Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the unit to the corresponding jacks on the TV using an optional Y Pb Pr cable (C). Rear of DVD+VCR Audio connection Connect the Left and Right AUDIO OUT jacks of the unit to the audio left/right in jacks on the TV using the supplied audio cables (A2). C A2 Note: If you connect both composite and component jacks to TV, the picture may be unstably on the TV. You could disconnect one of them to solve this problem. Pr Pb Y COMPONENT/PROGRESSIVE SCAN VIDEO INPUT R L AUDIO INPUT Rear of TV 10