JVC HR-XVC29S Instruction Manual - Page 15
Scan Mode Set (DVD deck only
View all JVC HR-XVC29S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Scan Mode Set (DVD deck only) This unit supports the progressive scan system (eg. 480p*) as well as the conventional interlaced scan system (eg. 480i*). If your TV equipped with component video connectors supports the progressive video input, you can enjoy a high quality picture by setting the progressive scan mode to active. ● Refer also to the instruction manuals supplied with your TV. ● If your TV equipped with component video connectors does not support the progressive video input, do not change the scan mode to the "PROGRESSIVE." * 480p and 480i indicate the number of scanning lines and scanning format of an image signal. • 480p indicates 480 scanning lines with progressive format. • 480i indicates 480 scanning lines with interlaced format. ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch on the Remote to the right. VCR/DVD EN 15 A Turn on the unit. Press POWER. B Select the DVD deck. On the unit Press VCR/DVD repeatedly so that the DVD indicator lights up on the front display panel. On the Remote Press DVD so that the DVD indicator lights up on the front display panel. C Switch the mode. A Press and hold PROGRESSIVE SCAN on the unit for more than 3 seconds. The current scan mode blinks on the front display panel. B While the current scan mode blinks, press w e to select "ProGr" (for the progressive scan mode) or "IntEr" (for the interlaced scan mode), then press ENTER. • If the current scan mode stops blinking before you make the setting, start from step A again. NOTE: When the progressive scan mode is selected, the Progressive mode indicator ( ) lights up on the front display panel. POWER Slide to the right. DVD PROGRESSIVE SCAN POWER