JVC HR-XVC37U Instruction Manual - Page 82
Power, Tape Transport Vcr Deck, Playback Vcr Deck
View all JVC HR-XVC37U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
82 EN TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your unit off for repair. POWER SYMPTOM 1. No power is supplied to the unit. 2. The Remote won't function. POSSIBLE CAUSE ● The AC power cord is disconnected. ● The batteries are discharged. CORRECTIVE ACTION Connect the AC power cord. Replace the dead batteries with new ones. TAPE TRANSPORT (VCR deck) SYMPTOM 1. During recording, the tape does not run. The counter display blinks on the front display panel. 2. The tape will not rewind or fastforward. POSSIBLE CAUSE ● The unit is in the Record Pause mode. ● The tape is already fully rewound or fast-forwarded. CORRECTIVE ACTION Press PLAY (4) to resume recording. Check the cassette. PLAYBACK (VCR deck) SYMPTOM 1. The VCR deck can not be operated. 2. The playback picture does not appear while the tape is running. 3. Noise appears during visual search. 4. Noise appears during normal playback. 5. The playback picture is blurred or interrupted while TV broadcasts are clear or "USE CLEANING CASSETTE" message appears on the screen. 6. Breaks are noticeable in Hi-Fi soundtrack. POSSIBLE CAUSE ● The VCR deck is not selected. ● If you are using the RF connection, - the TV receiver's channel selector is not set to the VCR channel. - the unit's VCR channel has not been correctly set. ● If you are using the AV, S-VIDEO or Component Video connection, the TV receiver is not set to the AV mode. ● This is normal. ● The automatic tracking mode is engaged. ● The video heads may be dirty. ● The automatic tracking mode is engaged. CORRECTIVE ACTION On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the Remote Press VCR so that the VCR indicator lights up. If you are using the RF connection, - set the TV receiver to the VCR channel. - perform "Set the VCR channel." (੬ pg. 14). If you are using the AV or S-VIDEO, Component Video connection, set the TV to its AV mode. Try manual tracking. (੬ pg. 33) Use a dry cleaning cassette ECL-3F, or consult your JVC dealer. Try manual tracking. (੬ pg. 33)