JVC KD-AV300 Instruction Manual - Page 11
Sound/Display/Other Settings
View all JVC KD-AV300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Sound/Display/Other Settings Change the display brightness (Dimmer) Press and hold DIMMER repeatedly to select [Dimmer Low] or [Dimmer High]. Setting menu Select a preset equalizer (EQ) Press EQ repeatedly to select a preset sound mode - [Flat] (default)/[Pop]/[User]/ [Techno]/[Rock]/[Classic]/[Jazz]/[Optimal]. (Corresponding sound mode indicator lights up.) Store your own sound settings 1 Press EQ repeatedly to select [User]. 2 Press MENU to display the top menu screen. 3 Turn the volume knob to select [Setting], then press the knob to display the setting menu. 4 Check that [ ] ([Setting / Audio]) is selected, then press the knob. 5 Turn the volume knob to select the item to set ([Bass]/[Treble]), then press the knob. 6 Turn the volume knob to adjust the value, then press T. 7 Repeat steps 5 and 6 to adjust the value for other settings. 8 Press G to exit. The setting is stored to [User] in EQ. • If no operation is done for about 10 seconds, the operation will be canceled. • To return to the previous layer, press T. Activate HBS (Hyper Bass Sound) Press HBS. (HBS indicator lights up.) • To cancel, press the button again. Change the general settings/check information on the [Setting] menu 1 Press MENU to display the top menu screen. 2 Turn the volume knob to select [Setting], then press the knob to display the setting menu. 3 Turn the volume knob to select the category ( : [Setting / Audio]/ : [Setting / General]), then press the knob. 4 Turn the volume knob to select the item to set (see the table below), then press the knob. 5 Turn the volume knob to change the setting, then press the knob. • If no operation is done for about 10 seconds, the operation will be canceled. • To return to the previous layer, press T. • To exit, press G. Default: XX Setting / Audio ( ) Bass −06 - +06 (00): Adjusts the sound elements of the bass tone. Treble −06 - +06 (00): Adjusts the sound elements of the treble tone. Fader R12 - F12 (00): Adjusts the front and rear speaker output balance. Balance L12 - R12 (00): Adjusts the left and right speaker output balance. Setting / General ( ) Beep ON / OFF: Activates or deactivates the keypress tone. Time 12 Hour / 24 Hour: Selects time format. Adjust: .Adjusts the clock. Language English / Spanish: Selects the text language used for on-screen information. 11 ENGLISH