JVC KD-DV7300 Instructions - Page 3
How to reset your unit, How to forcibly eject a disc, How to use functions mode - bluetooth
UPC - 046838028298
View all JVC KD-DV7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
ENGLISH How to reset your unit • Your preset adjustments will also be erased (except the registered Bluetooth device, see page 29). How to forcibly eject a disc "PLEASE" and "EJECT" appear alternately on the display. WARNINGS: To prevent accidents and damage • DO NOT install any unit in locations where; - it may obstruct the steering wheel and gearshift lever operations. - it may obstruct the operation of safety devices such as air bags. - it may obstruct visibility. • DO NOT operate the unit while driving. • If you need to operate the unit while driving, be sure to look ahead carefully. • The driver must not watch the monitor while driving. If the parking brake is not engaged, "DRIVER MUST NOT WATCH THE MONITOR WHILE DRIVING." appears on the monitor, and no playback picture will be shown. - This warning appears only when the parking brake wire is connected to the parking brake system built in the car (refer to the Installation/Connection Manual). • Be careful not to drop the disc when it ejects. • If this does not work, reset your unit. How to use functions mode If you press M MODE, the unit goes into functions mode, then the number buttons (except "1") and 5/∞ buttons work as different function buttons. For safety... • Do not raise the volume level too much, as this will block outside sounds, making driving dangerous. • Stop the car before performing any complicated operations. Temperature inside the car... If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit. [Within 5 seconds...] 3